Acrylstyrene facade priming

24.3-32388851-001-2004

Description of the priming: Single-component priming on basis acryl-styrene copolymers with the addition of plasticizer, water-resistant fillers.
Field of application: For the grounding of facades, buildings of construction for the subsequent putting of any paints.
Properties: Simplicity in the use, rapid drying. Outstanding penetration (binding of the porous, melyashchikh base layers). Outstanding alkali resistance and resistance to saltings. Air permeability in combination with the water resistance. Guarantee of prolonged adhesion and longevity of finishing facade coating. Possibility of putting at a temperature of air from -100 to + 300 C from the relative humidity to 85%.
Colour: at will of the customer
Methods of putting: brush, roller, air-airless dispersion.
The form of delivery: priming is supplied ready to the application

General technical characteristics

The exterior view of the film

Uniform lusterless coating without the stratification, the foreign inclusions, the craters is formed after drying

Relative viscosity on VZ-4 at temperature (20+0,5) 0 C, not less

Mass fraction of non-volatile substances, %

40 - 60

Degree of grinding, mkm

The adhesion of film marks, not more

Strength with the impact, on the instrument of type the U1, sm, not less

The resistance of film to the action of water, h, with (20+2) 0 C, not less

Resistance of film to action by 3% of solution NaCl, h

Time of drying at a temperature of 20 0C and relative humidities 85%, h
To degree of 1
To degree of 3
Time of the final polymerization
At a temperature it is below against 0 C

30 min
2 hours
72 hours
3-4 hours

Expenditure (theory)

160 g on 1 m 2